
Gear Aid Aquaseal FD Repair Kit
$10 to $12
Gear · Week of November 1
Nothing ends a cold morning in the blind faster than icy water creeping down your leg. A barbed wire fence, a broken branch, a dog's toenail on the boat ramp, and that great pair of waders from Issue #16 has a pinhole leak. The fix costs about the same as a box of shells, so there's no reason not to have one in the truck.
Our value pick is the Gear Aid Aquaseal FD Repair Kit. You get a quarter-ounce tube of Aquaseal FD urethane adhesive, two Tenacious Tape patches (one clear, one black), and an applicator brush. It bonds to neoprene, rubber, nylon, and GORE-TEX fabric, so it covers neoprene and breathable waders alike. It runs about $10 to $12, so check current pricing.
Know the trade-off: Aquaseal FD cures in 8 to 12 hours, and it wants temperatures between 60 and 100 degrees to do it. That makes it a fix you make at home the night after you find the leak, not in a 38-degree pit blind. Clean the spot with rubbing alcohol first, and let it cure fully before you hit the water again.
Step up: Gear Aid sells a Cure Accelerator that cuts the cure to about two hours. For pinholes in the field, Aquaseal UV runs around $9 to $12 and cures in about 30 seconds in sunlight, though Gear Aid recommends the FD for permanent repairs.
Finding the leak: turn your waders inside out, fill them with water, and look for the drip. Or, for breathable waders, spray the suspect area with rubbing alcohol from the outside and watch for a dark spot on the inside. Circle it with a marker before it dries. Toss the kit in the blind bag from Issue #17 and you'll never lose a morning to a leak again.
